Cam??

Moderator: Dietmar

Cam??

Postby Veefan » January 9th, 2011, 3:09 pm

I purchased a 1600 DP to build up to a Solo motor. I also received a bunch of parts including a few cams. I know the numbers might not mean anything since it might have been reground. But... any ideas of typically what engine this is for ??

It has Cofop on the Gear # VW 113.109.111 A
On the cam it has either 2BE or 28E cofop 0401091011

Thanks for any info
Veefan
 
Posts: 247
Joined: August 14th, 2007, 9:22 pm

Re: Cam??

Postby Lynn » January 9th, 2011, 8:44 pm

I have no Idea what the numbers mean, but no one uses stock cams. Many uses Emgle W-120 camshafts. My current engine has a W-130, but it might be a bit too much. My other engine has an custom ground Isky cam which is matched to the flow chart numbers for the heads.
69 Beach Solo Vee, #65 FM

85 Lynx B Solo Vee

71 Zink C4 Solo Vee
Lynn
 
Posts: 592
Joined: June 24th, 2006, 11:15 pm
Location: St. Louis, MO

Re: Cam??

Postby Dietmar » February 9th, 2011, 3:52 pm

The numbers are from a stock CoFap cam- don't know if it is/was reground.

Hope this helps
Dietmar
http://www.quixoteracing.com
Dietmar
 
Posts: 622
Joined: June 24th, 2006, 11:56 am
Location: Lakeside, Ca

Re: Cam??

Postby Veefan » February 9th, 2011, 5:16 pm

Thanks, a stock 1600 or a stock 1200?
Veefan
 
Posts: 247
Joined: August 14th, 2007, 9:22 pm


Return to Solo Vee

Who is online

Users browsing this forum: No registered users and 2 guests

cron