Lynx

Moderators: Dietmar, John Deonarine

Lynx

Postby Dietmar » October 31st, 2017, 11:03 am

Also listed under: Vehicles
Posted for a customer who changed his mind on a restoration

Having had no inquiries on the total package, I have convinced the owner to part out the vehicle.


Lynx frame freshly painted w/front roll hoop, gauges, $800
body - mid section and nose freshly painted (no tail). 600 .
1000 for frame and body. Crating extra.
Chrome beam (BARE) . 50 Can replace bushings. add 40
Trans ( 1.26 third) SOLD
shift linkage, tie rods, steering box, 50
2 -trailing arms 35 ea or 50 for the pair SOLD
2-modified spindles w/3.75" arms w/carrier and new bushings 100 ea
rebuilt add 50 ea
rebuilt with offset bushings 200 ea
2- new front drums w/studs and bearings 60 ea
2- rear drums w/studs 40 ea
quick release steering wheel system w/wheel 75
2- chrome axle tubes w/new boots 50 ea/90 for the pair
mono shock( Carrera) rear suspension to fit the original frame on a Lynx (shock, spring, bell cranks, droop limiter) 100
2-axles 50 ea
2- front backing plates ( chromed) 50 ea
2- rear backing plates (chromed) 30 ea

new 3/4" "z" bar by Fred Clark. 4130cm, heat treated with all links, brackets, bushings and new rod ends ( in other words, complete) $350


Pictures available upon request
Shipping extra.

Dietmar
http://www.quixoteracing
619 561 7774
fvraceri@cox.net
Dietmar
 
Posts: 615
Joined: June 24th, 2006, 11:56 am
Location: Lakeside, Ca

Re: Lynx

Postby satterley_sr » November 13th, 2017, 6:53 pm

Dietmar,

Can you measure the height of the rear frame and cross bar? ours has been cut off and I need to weld in a new one.

Dave
satterley_sr
 
Posts: 219
Joined: June 27th, 2006, 3:27 pm

Re: Lynx

Postby Dietmar » November 13th, 2017, 7:10 pm

E-mail sent
Dietmar
Dietmar
 
Posts: 615
Joined: June 24th, 2006, 11:56 am
Location: Lakeside, Ca


Return to Vintage Vee

Who is online

Users browsing this forum: No registered users and 1 guest

cron